My toddler is obsessed with rockets at the moment, so I decided to use an extra length of dowel to make him a sturdy one.

I’m currently brainstorming the best way to attach the fins, figured I’d see if anyone here had any ideas

Currently, I’m thinking of cutting perpendicular grooves from the bottom that the fins will slot into, with each pair of fins being a solid piece. But keep in mind I haven’t made the fins yet, so that’s definitely not set in stone.

Modeling after the v-2 because it looks as stereotypical as a rocket can

  • Ravi@feddit.org
    0·
    23 hours ago

    As cool as it looks you may want to consider dulling the tip , depending on the age and body control of your child.

    For the fins I’d just use a hand saw to make slits and glue them right in. Harder to break them off. For four just cut a cross in the bottom. For three cut from the sides.

    • sneekee_snek_17@lemmy.worldOP
      0·
      22 hours ago

      I’m definitely dulling everything, this is very early in the process

      I feel like cutting from the side would be quite difficult to start cleanly

      • Ravi@feddit.org
        0·
        15 hours ago

        I’d also go for the four fins. Easier to do and more robust, since you can prepare two V shaped double fins, put them together outside and the slide them into the main body together.