KStars

I’ll add that KStars has a really powerful astrophotography suite called Ekos. It has lots of helpful automation features to make imaging relatively simple to setup.

What I do have an issue with is new users that try and have problems and immediately start whinging that “FreeCAD isn’t like what I know. And it needs to be like my favorite” Those are the lazy people that can’t be bothered to learn something new. And they should either expend the effort to learn or go back to whatever they were using

I think that’s fair, but most criticisms of FreeCAD from people coming from other CAD packages rather fall into your latter category that you mention here:

But if you have given FreeCAD, (or ANYTHING new in life), an honest try and you can’t get the hang of it or simply don’t like it.

I don’t think we’re actually disagreeing in principle, just on what we perceive as the common criticisms of FreeCAD. Normally, I’ve seen people from other CAD programs get frustrated at limitations within FreeCAD or needing to work around bugs in ways that slow them down. For example, FreeCAD previously was unable to cope with multiple geometries being contained in a single sketch (I believe 1.0 now supports multiple extrudes from different sketch regions, but previously FreeCAD would throw an error), which made modeling less efficient for those coming from programs like Solidworks where this feature exists. Throw other issues like toponaming into the mix and it’s no surprise people from other CAD programs tried learning it, got frustrated (since their baseline was better than what FreeCAD could offer) and moved on.

I agree that criticizing FreeCAD for having different workflows than other CAD programs is a bit silly, though. I don’t really care what the exact workflow is as long as it 1) works and 2) is fast, and for me FreeCAD 1.0 (and previously Realthunder’s branch) ticks all the boxes there.

I appreciate the respectful discussion!

I do think the point about all CAD packages having failure paths is a little overblown. Yes, you can definitely get proprietary CAD to break but in my experience (at least with Solidworks and Fusion), it usually requires much more complex parts than FreeCAD parts. Post 1.0 the situation is definitely better though.

You’re right that users should try following best practices from day one, but realistically most users are not going to learn everything correctly automatically. They might use an out of date tutorial, or might have just learned by tinkering themselves.

The point I was trying to make was that because FreeCAD operates differently than other CAD programs do to one another and because it’s generally a bit more brittle and demanding of the user, I can’t say I blame anyone for not wanting to switch to it if they already have a CAD program they’re proficient with. You could call it being lazy, but from a practical standpoint there isn’t necessarily a ton to gain for a relatively large amount of time investment required to be capable of using it.

I really hope FreeCAD improves enough one day in the new user experience department. I love the software and have been using it as my tool of choice for years now, but evidently not everyone thinks it’s worth the time investment.

I’ll mention this fix is aimed at mitigating toponaming primarily for sketch attachment. Some features still struggle with toponaming, namely chamfers and fillets. But in any case, it’s a massive step forward and makes FreeCAD much easier to recommend! Until now I’ve been using Realthunder’s fork since toponaming was such a headache to resolve manually.

I think that’s a little unfair. The bigger issue IMO is that FreeCAD doesn’t quite share the same workflow as other (proprierary) CAD packages, so someone coming from proprietary CAD also needs to unlearn habits that were previously fine but now potentially harmful. For example, adding chamfers and fillets in FreeCAD pretty much should only be done at the end to avoid toponaming issues, which is less of an issue in other packages.

Yeah there’s a good chance you’re right. Maybe something to do with memory management as well.

Long term I’ll probably end up switching back to Darktable. I used it before and honestly it is quite good, but I currently have a free license for CC from my university and the AI denoise features in LR are pretty nice compared to the classical profiled denoise from Darktable. It does also help that the drivers for my SD card reader are less finicky on Windows so it’s easier for me to quickly copy over images from my camera on there instead of Linux. Hopefully that also gets better over time!

I don’t know exactly, but it’s apparently a thing. Some game anti-cheat software such as Easy Anti-Cheat will give you an error message saying something along the lines of “Virtual machines are not supported.” Some are easy to bypass by just tweaking your VM config, others not so much.

Fair enough! I think it’s more common for games to do that, but sometimes I had trouble with software on Windows that used virtualization elements themself. I probably just didn’t properly configure HyperV settings, but I know nested virtualization can be tricky.

For me it’s also because I’m on a laptop, and my Windows VM relies on me passing through an external GPU over TB3 but my laptops’ dedicated GPU has no connection to a display, so it would be tricky to try and do GPU passthrough on the VM if I were on the go. I like being able to boot Windows on the go to edit photos in Lightroom, for example, but otherwise I’d prefer to run the Linux host and use the Windows VM only as needed.

I’m a fan of dual booting AND using a passthrough VM. It’s easiest to set up if your machine has two NVMe slots and you put each OS on its own drive. This way you can pass the Windows NVMe through to the VM directly.

The advantage of this configuration is that you get the convenience of not needing to reboot to run some Windows specific software, but if you need to run software that doesn’t play nice with virtualization (maybe a program has too large a performance hit with virtualization, or software you want to run doesn’t support virtualized systems, like some anticheat-enabled games), you can always reboot to your same Windows installation directly.

Yeah I think Lemmy would actually work pretty reasonably. It reminds me of how lots of software and projects have Reddit communities. I agree that being able to share 1 account over many services, and especially not having to pay for infrastructure is something that drives discord use over forum-based platforms.

Personally, I’d prefer that projects use forums for community discussions rather than realtime chat platforms like Discord or Matrix. I think the bigger problem of projects using Discord is not that it’s closed source, but rather that it makes it difficult to search (since no indexing by search engines) and the format deprioritizes having discussion on a topic over a long period of time. Since Matrix is also intended for chat, it has these same issues (though at least you can preview a room without making an account).