Context:
People have been asking for IPv6 Support on GitHub since years (probably a decade by now)
… and someone even got so annoyed that they decided to setup a dedicated website for checking this: https://isgithubipv6.live/
Context:
People have been asking for IPv6 Support on GitHub since years (probably a decade by now)
… and someone even got so annoyed that they decided to setup a dedicated website for checking this: https://isgithubipv6.live/
They are not layer 7 firewalls for the network which are going to be where most the majority of attacks are concentrated. No citation needed unless you believe they are layer 7 firewalls or using something like Snort.
Added some clarification in my first sentence so it makes a bit of sense.
Wait, why are we talking about Layer 7 when NAT and firewalls are Layer 4 at best?
Because, as I said:
The NAT doesn’t have to operate at layer 7 to be effective for this because
The point is that the SPI firewalls are not protecting against the majority of the attacks we’ve seen for decades now from botnets and other arbitrary sources of attacks, except, perhaps targeted DDoSing which isn’t the big problems for most home networks. They must worry about having their OS’ and software exploited and owned in the background, which doesn’t get much of an assist from a router’s firewall.
Obviously, this is however true for the NAT since the NAT are going to drop connections originating from outside the network attempting to communicate with that software to exploit it
How is this “dropping packets” not applicable to firewalls, then? You are not just going to casually connect to my IPv6 device as we’re speaking. The default-deny firewall in my router does the heavy lifting… just like what NAT did.
Honestly, it just sounds like you need to brush up on networking knowledge. Repeat after me: NAT is not security.
Are you saying that everyone’s router’s firewall drops all packets from connections that originate from outside of their network?
It’s a stateful firewall. It simply drops unsolicited packets.
So, really, you were “correcting” me for you and your specific setup at the very beginning because your router’s firewall has a deny rule for all inbound connections because I must have been confusing what a NAT and what a firewall is because I must have been talking about your specific configuration on your specific devices.
Holy. Fucking. Shit.
Oh come on, are you seriously suggesting that default-deny stateful firewall is not the norm??
Holy. Fucking. Shit. Indeed.
You keep on suggesting to me that you really have no idea how networking works. (Which is par on course for people thinking NAT == security, but I digress)
Let me tell you: All. Modern. Routers. include a stateful firewall. If it supports NAT, it must support stateful firewalling. To Linux at least, NAT is just a special kind of firewall rule called
masquerade
. Disregarding routers, even your computer whether Linux (netfilter) or Windows (Windows Firewall) comes built-in with a stateful firewall.Having a NAT on a consumer router is indeed the norm. I don’t even see how you could say it is not.
I never said NAT = security. As a matter of fact, I even said
But hey, strawmanning didn’t stop your original comment to me either, so why stop there?
I never even implied the opposite.
Right, because masquerade is NAT…specifically Source NAT.
I’m just going to go ahead an unsubscribe from this conversation.