My nightstand lights are connected to a surge protector plugged into a Zigbee smart plug plugged into a dumb wall outlet controlled by a single dumb wall switch.
I have the smart plug set to default=On, so the wall switch works fine, and I can also turn the lights off from my phone or via an automation. All good so far.
What I WANT is to be able to turn the lights ON without getting out of bed, and irrespective of the position of the switch.
I tried putting a second smart plug in the switch-controlled outlet and making an automation to toggle the surge protector’s smart plug when the switch’s empty smart plug powers off/on via the wall switch, but it looks like it’s not simple to detect a Zigbee device “disappearing”. I found some integrations that detect zigbee devices disappearing, but those seemed more for running health checks to detect and repair moved devices than for live detection.
Any suggestions?
That’s probably possible, but doesn’t solve my problem. That said, some commentors found my explanation confusing.
When the switch is toggled ON, I want the lights to go ON.
When the switch is toggled OFF, I want the lights to go OFF.
Irrespective of the switch position, I want to be able to turn the lights ON or OFF with Home Assistant.
It sounds like a zigbee relay behind the switch will be the way to detect the switch position.
If you’re putting a relay in the outlet box, you can probably eliminate your smart plug as well
The second one that I attempted to use as a switch position detector, you mean? Because I think I’d still need the one in the un-switched outlet to turn the lights on and off.
My point is, you would keep the switch on no matter what and flick it off and on again when switching the lights on/off